Jump to content

Welcome to DreamerRO's Community
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Toggle shoutbox Dreamer's Shoutbox Open the Shoutbox in a popup

Changelog       In-game Guides       Job Guides       Rules       Review us       Support Ticket       Stability Discussion

Failure to follow the rules below may result in a permanent ban from the shoutbox without warning.
1. Server Down or Lag discussions do not belong on the shout box, you may ask here.
2. Do not start misleading discussions or rumors without facts
* You need 5 active posts to use the shout box. (Do not spam or post useless stuff to reach 5 posts)
@  battlenet : (23 January 2017 - 04:02 AM) login server closed
@  AnikamaAshley : (23 January 2017 - 04:02 AM) close?
@  Four : (23 January 2017 - 04:01 AM) back up
@  Kanade : (23 January 2017 - 04:01 AM) Same
@  Chancharan : (23 January 2017 - 04:01 AM) cant connect fak
@  enteng : (23 January 2017 - 03:08 AM) sir any guide for Elite dungeon
@  Cathline : (23 January 2017 - 03:02 AM) Thanks @Lightning Botman
@  Lightning Bo... : (23 January 2017 - 02:48 AM) Or you can opt to get an Alchemy Aura.
@  Lightning Bo... : (23 January 2017 - 02:48 AM) Mystic Chakra.
@  Cathline : (23 January 2017 - 02:19 AM) What is damage lower aura for boss mobs?
@  penta021 : (22 January 2017 - 08:55 PM) #giveusbackourEDsuppliesthx
@  hp923 : (22 January 2017 - 08:53 PM) im aware about that however,i used to farm feathers at prt_fild01 and now tried farming there again. it doesnt work now.
@  Ezee : (22 January 2017 - 08:49 PM) there is some certain maps that the skill won't work all you have to do is to go to the alternate map.
@  hp923 : (22 January 2017 - 08:47 PM) i cant kill 5 mobs simultaneously with stone+release combo around the map. whats going on? :(
@  agungr : (22 January 2017 - 08:45 PM) UP
@  vindrawan : (22 January 2017 - 08:44 PM) no salary sad
@  penta021 : (22 January 2017 - 08:43 PM) alright close while ED RIP
@  agungr : (22 January 2017 - 08:42 PM) RIP
@  jammmes14 : (22 January 2017 - 08:42 PM) Close?
@  skullker : (22 January 2017 - 08:42 PM) rofl

Photo

Small Screen Problem


Best Answer Confusion, 25 December 2013 - 10:39 PM

For Windows 7/8:

Download this setup (setup.exe) then paste / replace the one that is currently inside your dRO Folder.

http://www.mediafire...omizedSetup.rar

 

1. After replacing / pasting, right click on it, then click "Troubleshoot compatibility".

2. Click "Try recommended settings".

3. Click "Test the program".

4. Click "Next".

5. Lastly, click "Yes, save these settings for this program".

 

If it doesn't work, follow the steps below: 

 

If you are running windows 8 follow these steps:

1. Move your mouse to the bottom left, right click, then click "run".
2. Type "regedit" then click ok.
3. Click "HKEY_LOCAL_MACHINE".
4. Click "Software".
5. Click "Gravity Soft".
6. Click "Ragnarok".
7. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
8. Right click on it, click modify, select Decimal, and input data.
 
If you are running windows 7 follow these steps:
1. Click the windows 7 logo / Start.
2. Search "Run", and an application will show then click on it.
3. Type "regedit" then click ok.
4. Click "HKEY_LOCAL_MACHINE".
5. Click "Software".
6. Click "Gravity Soft".
7. Click "Ragnarok".
8. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
9. Right click on it, click modify, select Decimal, and input data.
 
If you are running windows XP follow these steps:
1. Click start and click run.
2. Type "regedit" then click ok.
3. Click "HKEY_LOCAL_MACHINE".
4. Click "Software".
5. Click "Gravity Soft".
6. Click "Ragnarok".
7. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
8. Right click on it, click modify, select Decimal, and input data.
 
Go to the full post »


  • This topic is locked This topic is locked
13 replies to this topic

#1
mikaru42

mikaru42

    Member

  • Forum Rank
  • 15 posts

I already finished downloading dreamer RO and install it the same folder in ragnarok files . I also finished patching it but when i started it   this was happen ..

Attached Files


Edited by mikaru42, 25 December 2013 - 09:16 PM.

  • 1

#2
mikaru42

mikaru42

    Member

  • Forum Rank
  • 15 posts

I already finished downloading dreamer RO and install it the same folder in ragnarok files . I also finished patching it but when i started it   this was happen ..

nosebleed >.<


  • 0

#3
ampex1106

ampex1106

    Advanced Member

  • Forum Rank
  • 131 posts
  • LocationANIMUS
  • Favorite Class:Royal Guard

what client did you download? full client or lite client??


  • 0

#4
Kieuri

Kieuri

    Member

  • Forum Rank
  • 20 posts
  • LocationUnited Kingdom
  • Favorite Class:High Priest

Are you sure you didn't mix any files with any other private servers?

Is your kRO / Sakray patched?


  • 0

#5
Bryan Frostt

Bryan Frostt

    ♣ çhòkí çhòkí ♣

  • Forum Rank
  • 383 posts
  • LocationMom told me not to tell anyone
  • Favorite Class:Minstrel
U need the old setup file..or try run as admin?
  • 0

#6
mikaru42

mikaru42

    Member

  • Forum Rank
  • 15 posts

what client did you download? full client or lite client??

Lite Client Sir 


  • 0

#7
mikaru42

mikaru42

    Member

  • Forum Rank
  • 15 posts

Yes I didnt mix any files sir aside for the P2p ragnarok. (valkyrie)

the latest in the ragnarok is the hall of abyss  i downloaded the fullpatch already


  • 0

#8
mikaru42

mikaru42

    Member

  • Forum Rank
  • 15 posts

U need the old setup file..or try run as admin?

 

Sir Bryan .. Now ... I click the start after finishing the patch but the game is not opening


  • 0

#9
Nex

Nex

    Meh

  • Forum Rank
  • 632 posts
  • LocationHangar Bay
  • Favorite Class:Ranger

Question:

I started Ragnarok and the window is just a tiny bar/the fullscreen just shows black and white.

 

Answer:

Chances are that you are playing Ragnarok on Windows 8 or a proer version of Windows 7. If that is the case, try either of the following:

1. Change the resolution of your client via an OLD version of setup. Make sure you are running it as adminstrator.

2. Change the compability of your ragnarok to XP. (Right click>Properties>Compability>Older versions)

3. Try both 1 & 2.

http://playdreamerro...with-windows-8/

 

Follow this, also if it still doesn't work change your resolution setting down to "Direct 3D HAL" then it should work fine, I just did it because I was having the same problem. Yes Windows 8 Fucking Sucks but eh they have to make money somehow


  • 1

#10
Confusion

Confusion

    Edit my About Me page

  • Forum Rank
  • 1,629 posts
  • Location: Outer Space
  • Favorite Class:Wanderer


Users Awards
✓  Best Answer

For Windows 7/8:

Download this setup (setup.exe) then paste / replace the one that is currently inside your dRO Folder.

http://www.mediafire...omizedSetup.rar

 

1. After replacing / pasting, right click on it, then click "Troubleshoot compatibility".

2. Click "Try recommended settings".

3. Click "Test the program".

4. Click "Next".

5. Lastly, click "Yes, save these settings for this program".

 

If it doesn't work, follow the steps below: 

 

If you are running windows 8 follow these steps:

1. Move your mouse to the bottom left, right click, then click "run".
2. Type "regedit" then click ok.
3. Click "HKEY_LOCAL_MACHINE".
4. Click "Software".
5. Click "Gravity Soft".
6. Click "Ragnarok".
7. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
8. Right click on it, click modify, select Decimal, and input data.
 
If you are running windows 7 follow these steps:
1. Click the windows 7 logo / Start.
2. Search "Run", and an application will show then click on it.
3. Type "regedit" then click ok.
4. Click "HKEY_LOCAL_MACHINE".
5. Click "Software".
6. Click "Gravity Soft".
7. Click "Ragnarok".
8. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
9. Right click on it, click modify, select Decimal, and input data.
 
If you are running windows XP follow these steps:
1. Click start and click run.
2. Type "regedit" then click ok.
3. Click "HKEY_LOCAL_MACHINE".
4. Click "Software".
5. Click "Gravity Soft".
6. Click "Ragnarok".
7. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
8. Right click on it, click modify, select Decimal, and input data.
 

  • 2

#11
mikaru42

mikaru42

    Member

  • Forum Rank
  • 15 posts

 

For Windows 7/8:

Download this setup (setup.exe) then paste / replace the one that is currently inside your dRO Folder.

http://www.mediafire...omizedSetup.rar

 

1. After replacing / pasting, right click on it, then click "Troubleshoot compatibility".

2. Click "Try recommended settings".

3. Click "Test the program".

4. Click "Next".

5. Lastly, click "Yes, save these settings for this program".

 

If it doesn't work, follow the steps below: 

 

If you are running windows 8 follow these steps:

1. Move your mouse to the bottom left, right click, then click "run".
2. Type "regedit" then click ok.
3. Click "HKEY_LOCAL_MACHINE".
4. Click "Software".
5. Click "Gravity Soft".
6. Click "Ragnarok".
7. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
8. Right click on it, click modify, select Decimal, and input data.
 
If you are running windows 7 follow these steps:
1. Click the windows 7 logo / Start.
2. Search "Run", and an application will show then click on it.
3. Type "regedit" then click ok.
4. Click "HKEY_LOCAL_MACHINE".
5. Click "Software".
6. Click "Gravity Soft".
7. Click "Ragnarok".
8. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
9. Right click on it, click modify, select Decimal, and input data.
 
If you are running windows XP follow these steps:
1. Click start and click run.
2. Type "regedit" then click ok.
3. Click "HKEY_LOCAL_MACHINE".
4. Click "Software".
5. Click "Gravity Soft".
6. Click "Ragnarok".
7. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
8. Right click on it, click modify, select Decimal, and input data.
 

 

SIR I downloaded the customize setup.rar then I click it and extract it on Dro folder but the result was " ERROR: cannot delete the output file setup.exe"


  • 0

#12
mikaru42

mikaru42

    Member

  • Forum Rank
  • 15 posts

I will Try the other steps sir .. :) thank you for helping me


  • 0

#13
mikaru42

mikaru42

    Member

  • Forum Rank
  • 15 posts

 

For Windows 7/8:

Download this setup (setup.exe) then paste / replace the one that is currently inside your dRO Folder.

http://www.mediafire...omizedSetup.rar

 

1. After replacing / pasting, right click on it, then click "Troubleshoot compatibility".

2. Click "Try recommended settings".

3. Click "Test the program".

4. Click "Next".

5. Lastly, click "Yes, save these settings for this program".

 

If it doesn't work, follow the steps below: 

 

If you are running windows 8 follow these steps:

1. Move your mouse to the bottom left, right click, then click "run".
2. Type "regedit" then click ok.
3. Click "HKEY_LOCAL_MACHINE".
4. Click "Software".
5. Click "Gravity Soft".
6. Click "Ragnarok".
7. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
8. Right click on it, click modify, select Decimal, and input data.
 
If you are running windows 7 follow these steps:
1. Click the windows 7 logo / Start.
2. Search "Run", and an application will show then click on it.
3. Type "regedit" then click ok.
4. Click "HKEY_LOCAL_MACHINE".
5. Click "Software".
6. Click "Gravity Soft".
7. Click "Ragnarok".
8. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
9. Right click on it, click modify, select Decimal, and input data.
 
If you are running windows XP follow these steps:
1. Click start and click run.
2. Type "regedit" then click ok.
3. Click "HKEY_LOCAL_MACHINE".
4. Click "Software".
5. Click "Gravity Soft".
6. Click "Ragnarok".
7. When you are in "Ragnarok" folder, look for the "WIDTH", and the "HEIGHT".
8. Right click on it, click modify, select Decimal, and input data.
 

 

SIR , When I clicked the Width then modified I selected the Decimal ..how many input data?

 

I change it to decimal but it changes to hexadecimal.


  • 0

#14
Confusion

Confusion

    Edit my About Me page

  • Forum Rank
  • 1,629 posts
  • Location: Outer Space
  • Favorite Class:Wanderer


Users Awards

After replacing the data/number in it and clicked ok, then it's done and move on to the other one.

 

I use 700 for height, and 1000 for width.


  • 0




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users